AAD RMX4050

Chi tiết sản phẩm

• THÔNG SỐ KỶ THUẬT: RMX4050
• STEREO MODE (Both Channels Driven)
  • 8 ohms : 1250 W @ 0.1% THD
  • 4 ohms : 1450 W @ 0.1% THD
  • 2 ohms : 2900W @ 0.1% THD
• BRIDGE MONO MODE
  • 8 ohms : 2500 W @ 0.1% THD
  • 4 ohms : 5000 W @ 1% THD
• Frequency Response: 20 Hz to 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB
• Damping Factor Greater than 250 @ 8 ohms
• Noise (unweighted) 100 dB below rated output (20 Hz - 20 kHz, 8 ohm load)
• Input Impedance: 20k ohm balanced, 10k ohm unbalanced
• Input Sensitivity: 1.12 Vrms for 650 W into 8 ohms
• Voltage Gain: 64x (36 dB) for 8 ohm load
• Controls Front: AC power switch, Ch. 1 and Ch. 2 gain control
• Controls Rear: 10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge mode. Push-button circuit breaker for each channel.
• Indicators: Power-On: Green LED, Protect: Red LED, Signal -30dB: Yellow LED, Clip: Red LED
• Connectors Input: XLR female, TRS (1/4-inch), and barrier-strip screw terminals, each channel
• Connectors Output: Binding posts and Speakon® outputs (Ch. 1 Speakon wired for biamp)
• Cooling: Continuously variable-speed fan, rear-to-front air flow
• Amplifier Protection: Short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads
• Load Protection: On/off muting, DC fault output crowbar
• Power Requirements: 230 Volts AC (+/-10%) 50-60 Hz
• Dimensions: 19" 19.0" (48.3 cm) wide, 5.25" (13.3 cm) tall, 15.9" (40.39 cm) overall depth
• Weight: 32 kg net, 35.5 kg shipping
• MADEIN CHINA